|
Diecutting, Foiling and Folder-Gluing Machines
Featured product:
MK 1060ST
Automatic Platen Foil Stamping and Diecutting Press
MK 1060 ST
platen foil stamping machine is another masterpiece of Masterwork
after MK 920 YMI-II. This machine absorbs design experience in
production and the advantages in MK 920 YMI-II and do a lot creating
design on it.
MK 1060 ST
is a machine of wide range foil stamping, which has
transversal and longitudinal two directions foil feeding function.
The machine introduces into the international advanced feeding
system, it enhances the stability of feeding. And we use lots of
automatic control system, realizing the automatic adjustment,
decreasing the operators' intension and increasing the convenience.
Beside the automatic control system,
more pneumatic control system also is used, for example the vacuum
feeding system, pneumatic side guides, pneumatic chase and cutting
plate lock-up device, pneumatic jogger, pneumatic sample picking, as
well as pneumatic additional delivery, etc.
The theory of design improved the
convenience of operation and adjustment. The machine is designed
according to the CE and added a safety model. The layout of the
operation parts are more reasonable.
specifications
| Maximum
sheet size |
1060mm x
760mm |
| Minimum
sheet size |
400mm x
350mm |
| Maximum
die cutting size |
1060mm x
745mm |
| maximum
stamping size |
1060mm x
740mm |
| Dimension
of Chase |
1120mm x
770mm |
| Paper
standard |
90~2000 g/sqm |
| Paper
standard |
0.1~ 2mm |
| Paper
standard (Cardboard) |
corrugated
board<=4mm |
| Max
pressure protect system |
260 T |
| Max. speed
(Die cutting) |
7500
sheets/hour |
| Max. speed
(Stamping) |
7000
sheets/hour |
| Max.
Height of Feeding pile |
1250mm
1450mm(optional) |
| Max.
Height of Delivery pile |
1050mm
1250mm(optional) |
| Max.
diameter of foil reel in longitudinal |
dia. 250mm |
| Max.
diameter of foil reel in cross |
dia. 200mm |
| Heating
zone |
20
zones,40~180°C |
| Standard
stamping accuracy |
<=
±0.075mm |
| Foil servo
system |
3
longitudinal+2 cross |
| Rate
wattage |
11 KW |
|
Dimension(L x W x H) |
6025mm x
4500mm x 2265mm |
| Weight |
20T |
| Air Supply |
0.55~0.7
Mpa,>0.6 cubic m/min
|
In the interest of product
improvement, we reserve the right to change specifications and
features without notice.
Cross foil pay-off system
Cross foil pay-off system driven by
servo motor for the maximal saving of foil. Foil rewinding rollers
located at operation side for the ease and convenience of mahcine
operation.
Delivery brush rollers
Delivery brush rollers for longitudinal direction
foil can be used for different width foils. And blasting nozzles for
oil operation and the other operation parts are marked out more
reasonable and convenient to operate.
MABEG feeding system
MABEG feeding system with high speed feeder head
automatically adjusts is position in machine direction and
height in accordance with the position of feederpile. Automatic
adjustment of feeder pile position in transversal direction.
Pneumatic lock-up system
Pneumatic lock-up system for
honeycomb chase and support plate for easy and Quick operation of
pulling out and pushing in honeycomb chase and support plate.
Pneumatic side lays
(optional)
Pneumatically controlled pull
and push side lays eliminate mark on paper stock.
Revolving pressing sheet device
Revolving sheet hold-down press bar
provides larger room for operation in in-feed area and effectively
prevents sheet from scratch.
The delivery
Pneumatic jogger facilitates job
changeover of different sheet size at delivery. Brush damper system
with pressure adjustment from the outside of machine without
interrupting machine running. Air blowers in machine and cross
directions greatly help sheets discharge from grippers on delivery
pile. Pneumatic system for job check-up and stamping of finished
sheets.
The foil rewinder (optional)
Foil rewinder with 6 rewinding
rollers with pneumatic control for the mounting of and dismantle of
paper core on and off rewinding rollers.
Vacuum Feeding system (optional)
Feed table with vacuum suction for smooth and stable
in-feed of paper stock. The simple and clean structure with minimal
number of accessories marks job setup and operation of machine much
easier than conventional design.
|
800
x 630mm, 9,000 sph, belt drive, Fuji PLC control, 12 tonnes.
Petratto Metro 78 and
102
